OM1 Duplex solution to converting ST to LC

The fiber cable is UL Listed OFNP for use in ducts, plenums and air-handling spaces. Standard surface print denotes construction, NEC rating, and fiber type, and includes footage markers. Custom print can also be accommodated.Excel OM1 Duplex patch leads are generally available from stock in lengths from 1 to 30 metres. For requirements which may vary from this, such as specific length, colour or labelling requirements, please contact your local Excel distributor. Not all cable types and lengths are available from stock in both grey and orange please check with you nearest sales office for details.

.For joining two cables together or for patch panel mounting, these OM1 Duplex Fibre Optic Multimode Duplex Couplers SC are a simple solution. Their one piece design is supplied in beige to differentiale it from the blue singlemode version. Supplied with dust caps.Excel duplex patch leads are manufactured from the highest quality 900 or 600μm optical fibre, terminated with ceramic ferrule connectors of various types. Cable preparation, termination and testing is carried out to strictly managed procedures in an Excel approved manufacturing facility. In addition, ISO/IEC 24702 (Generic cabling
for industrial premises) specifies OS2. The international standards call these OM1 Patch Cord. In Europe and the UK,BS EN 50173-1:2007 contains all five and calls them “Optical fibre cable Categories”. Whilst there is no difference in the actual specifications as shown in Tables 1 and 2 below, it is important to clarify the intention of
these naming schemes.

MiniSAS Cables technology that now has culminated

A new line of MiniSAS Cables assemblies comes in the form of high-performance, cost-effective cabling solutions for high-speed serial buses supporting 4X Serial Attached SCSI (SAS) architectures. The copper cables from Tyco Electronics are designed to be fully compliant with 3 Gbit/s SAS and 6 Gbit/s SAS protocols. Target product applications include mass storage systems, storage area networks and switches, servers and routers.

QSFP+ solution is designed for high-density applications

Siemon Interconnect Solutions QSFP+ (Quad Small Form-factor Pluggable Plus) Copper Cable assemblies were developed for high-density applications, offering a cost-effective, low-power option for high-speed data center interconnects up to 10 meters. The QSFP+ form factor (Quad SFP+) can replace up to four standard SFP+ connections, providing greater density and reduced system cost. The direct-attach assemblies support emerging 40Gb/s applications and are available in standard lengths up to 6 meters with longer custom lengths available.Quad Small Form-factor Pluggable QSFP to CX4 DDR Cable 2M, Passive solution is designed for high-density applications. Components of the system include the Electro Magnetic Interference (EMI) shielding cage, active optical cables (AOC), passive copper cable assembly, active copper cable assembly, optical MTP cable assembly, optical loopback, 38-circuit SMT iPass? host connector, and stacked integrated connectors and cages.

OM1 Duplex optical patching panels and network

fiber optic cables are fully tested to guarantee top performance. Our strict testing standards mandate a maximum allowable insertion loss if 0.02 dB (or less). Each connector is visually inspected with a 400x microscope for any surface or interior cracks, scratches, contaminants, or other imperfections which can pick up defects that insertion loss testing alone may miss. Each assembly is serialized for easy identification and sealed in individual Ziploc bags. Test results are included in each order.For joining two cables together or for patch panel mounting, these OM1 Duplex Fibre Optic Multimode Duplex Couplers SC are a simple solution.

System on an SDH SFP manager at RAD Data Communications

Deriving power from the host device, it requires no additional electricity and offers significant savings in space, cabling and power consumption.Fully managed, hot-swappable and software-configurable, the MiRICi-155 increases network flexibility by allowing quick, ad-hoc installations and easy integration. This further reduces OpEx by liminating the need for equipment certification and integration, as well as specialized training for field technicians.Connecting to any Ethernet switch or router with an SFP GbE port, it significantly reduces capital expenses (CapEx) by offering a cost-effective alternative to external, standalone converter units or line cards,explains Jacky Acoca, System on an SDH SFP manager at RAD Data Communications. The MiRICi-155, moreover, reduces operating expense (OpEx) by maximizing bandwidth utilization using highly efficient Ethernet SDH SFP mapping and standards-based encapsulation techniques, he added.The SFPcables.com's Multi-rate Series 2.67Gb/s transceiver module integrates optics and electronics in a Small Form Factor Pluggable (SFP) package.

10Gtek QSFP+ AOC is an assembly of 4 full-duplex lanes

enable deployment of additional ports for increased number of AOCs per system, resulting in more connectivity options and total system cost savings. Optical pluggable QSFP+ MTP? cable assemblies are available in 12-fiber 3.00mm round cable and a robust 4.50mm round cable. Loopbacks feature a compact housing compatible with module spacing and loop optical transmit ports to receive ports for testing, burn-in and field troubleshooting. QSFP+ AOC cables are available in  standard lengths up to 300m and  custom lengths up to 4km (2.49 miles)
for design flexibility QSFP active optical cables are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe.

10G SFP+ cables assemblies are constructed using premium 30AWG

These cables are designed as a more cost-effective and lower power alternative to optical cable assemblies for short length interconnects between active network equipment in data center and enterprise networking applications. Our 10G SFP+ cables assemblies are constructed using premium 30AWG, 100 Ohm cable and feature SFP+ SFF-8431 standards based connectors with quick release pull-latches. With a low smoke zero halogen (LSZH) jacket, these cables are designed to emit limited smoke and no halogen in environments where exposure to high heat sources is a possibility. These assemblies support up to 10G, meeting or exceeding current standards specifications.The SFPCMM1M Cisco Compatible 1m 10G SFP+ cables is a fully hot pluggable, direct attach cable, supporting 10 Gigabit Ethernet and Fiber Channel applications connected through (Small Form Factor Pluggable) SFP+ ports.Designed for short length, high speed interconnects, this low power, low latency Twinax cable is a cost-effective alternative to fiber optic cable assemblies and is intended for short distance applications such as point-to-point in-rack and across rack network switch/server connections.

External SAS & MiniSAS Cables from Amphenol

TE's MiniSAS Cables receptacle assembly is the next-generation SAS high-density and high-speed IO interface. This interface was adopted for the SAS 2.1 standard and proposed for SAS 3.0 standard, and is designed to support 6G and future 12G SAS applications. The assembly is offered in 4x, 8x, and 16x versions. The reduced size of the MiniSAS Cables system provides additional space for system designers. While a low-profile PCIe card can accept four 4x Mini SAS HD connectors, it can only accept two Mini SAS connectors.The passive MiniSAS HD copper cable assembly is designed for broadband operation optimized for 6 and 12 Gbps. The EEPROM signature enables the host to identify what type and length of cable is connected to its port, and can be customized for any application.

compliant to QSFP+ A0C-Source Agreement

QSFP+ to 4 XFP hybrid splitter cables make a great cost-effective interconnect solution to IT professionals by merging 40G QSFP+ AOC and 10G XFP enabled host adapters, switches and servers. For typical applications, users can install this kind of splitter cable between an available QSFP port on their 40-Gigabit/s rated switch and feed up to four upstream 10GbE-XFP enabled switches. Each QSFP-XFP splitter cable features a single QSFP connector (SFF-8436) rated for 40-Gb/s on one end and 4 XFP connectors (INF-8077i) on the other end, each rated for 10-Gb/s.QSFP+ to Mini SAS (SFF-8088) hybrid cables are designed for high-density Serial Attached SCSI (SAS) applications. These Mini SAS Cables are used as an interconnect solution between newer QSFP+ Hardware and older external 3G and 6G Mini SAS equipment and provide data transfer rates up to 10Gbops per channel at distances of up to 10 meters, and they are all compliant to QSFP+ A0C-Source Agreement. Welcome to choose it from our website where different lengths can be selecting.Fiberstore is a professional fiber optic products manufacturer,we provide a wide variety of fiber optic products, we not only have t he 40G QSFP+ AOC Cables, but also have other types of Direct Attach Copper Cable. If you can’t find your need in my company, you can contact to our sales, because we offer the customized service. Welcome to FiberStore,I think it can help to solve your fiber optic problem.

SDH SFP of fast Ethernet and gigabit

The network operators are changing the network with multiple-protocol into the network with a single protocol. For example, in the mobile support network, the DS1/E1 signal could be fed by SAToP protocol. And the operators will need to apply the current SDH SFP signal into the bundle network next thing.At present, the intelligent SFP fiber optic module  supports the dual-fiber and single-fiber application. In addition, the intelligent OC3 SFP/STM-1 SFP fiber optic transceiver supports the transmission distance which ups to 80km. SFP interfaces between communication devices like switches, routers and fiber optic cables, and performs conversions between optical and electrical signals. SDH SFP transceivers support communications standards including synchronous optical networking (SONET)/synchronous digital hierarchy (SDH), gigabit ethernet and fiber channel. They also allow the transport of fast Ethernet and gigabit Ethernet LAN packets over time-division-multiplexing-based WANs, as well as the transmission of E1/T1 streams over packet-switched networks.